WRF_PRC_SCD - Purchasing Scheduling Seasonal Procurement
The following messages are stored in message class WRF_PRC_SCD: Purchasing Scheduling Seasonal Procurement.
It is part of development package WRF_PRC_SCD_DDIC in software component LO-RFM-PUR-SCD. This development package consists of objects that can be grouped under "Seasonal Procurement: DDIC Objects Area of Scheduling".
It is part of development package WRF_PRC_SCD_DDIC in software component LO-RFM-PUR-SCD. This development package consists of objects that can be grouped under "Seasonal Procurement: DDIC Objects Area of Scheduling".
Message Nr ▲ | Message Text |
|---|---|
| 001 | Date &1 not maintained |
| 002 | Date ID missing |
| 003 | Document: &1 item: &2 sched. line: &3: date line ID missing |
| 004 | Date &1 is inactive |
| 005 | Description for date &1 in language &2 not maintained |
| 006 | You have maintained Incoterm but you must enter a transfer date |
| 007 | Date &1: Planned date &2 overwritten by date &3 |
| 008 | Date &1: Tolerance date &2 overwritten by date &3 |
| 009 | No date description exists for &1 |
| 100 | Transportation chain ID is empty |
| 101 | Transportation chain &1 &2 does not exist |
| 102 | No legs exist for transportation chain &1 &2 |
| 103 | Transportation chain header import structure is empty |
| 104 | &1 is not defined as possible transfer date |
| 105 | Route &1 - &2 - &3 is not contained in the transportation times table |
| 106 | Error writing expected events; transportation chain ID &1 |
| 107 | Transportation chain &1 &2 was saved |
| 108 | Transportation chain &1 &2 was deleted |
| 109 | Transportation chain &1 &2 was changed |
| 111 | Transportation chain &1 &2 is blocked; change not possible |
| 112 | Transportation chain type is empty - maintain at header level |
| 113 | First leg not unique; select a row |
| 114 | Ctry/Reg. of orig. &1 and c/r of depart. &2 of prev. leg not the same |
| 115 | Place of arrival &1 and place of depart. &2 of previous leg not the same |
| 116 | Loop creation: date &1 (&2) already used as a date |
| 117 | Loop creation: date &1 already used as preceding date |
| 118 | Transportation chain &1 &2 already exists |
| 119 | Last date in &1 must be &2 and not &3 |
| 120 | Transportation chain &1 &2 cannot be changed |
| 121 | Legs for transportation chain &1 &2 cannot be changed |
| 122 | Transportation chain &1 &2 cannot be deleted |
| 123 | Legs for transportation chain &1 &2 cannot be deleted |
| 124 | Transportation chain &1 &2 cannot be created |
| 125 | Legs for transportation chain &1 &2 cannot be created |
| 126 | Date in leg missing |
| 127 | Preceding date in leg missing |
| 128 | Informative date &1 cannot have a predecessor date |
| 129 | Transportation chain &1 &2 cannot be saved |
| 130 | Point of arrival and point of departure &1 are the same |
| 131 | Transportation chain &1 &2 does not exist; it will be created |
| 132 | Actual posting was not updated, date ID from &1 is empty |
| 133 | No leg found for preceding date &1; no sorting possible |
| 134 | Dispatch method &1 does not exist |
| 135 | Transportation chain type changed to "external" |
| 136 | Saving not possible: no legs maintained |
| 137 | For the first operative date in &1, preceding date must be &2 |
| 138 | Departure and arrival dates must be maintained for operative dates |
| 139 | Leg with date &1 cannot be sorted |
| 140 | Country/Region of departure &1 with region of departure &2 already exists |
| 141 | Country/Region of departure &1 with region of arrival &2 already exists |
| 142 | Deletion not possible: supplier &1 is assigned transportation chain &2 |
| 143 | Move time does not exist: locations are deleted |
| 144 | &1 is still used in transportation chain(s); deletion not possible |
| 145 | Transportation chain &1 is assigned to supplier(s) |
| 146 | Purchase order &1 does not exist |
| 147 | Item & could not be written to the worklist |
| 148 | Mode of transport missing in leg with c/r of depart. &1 and arriv. &2 |
| 149 | More general leg (without locations) copied for &1 - &2 - &3 |
| 150 | Leg and more general leg do not exist for &1 - &2 - &3 |
| 151 | &1 is still used in dateline(s); deletion not possible |
| 152 | Subsequent leg &1 - &2 cannot be added to leg &3 - &4 |
| 153 | Select one line only |
| 154 | Leg &1 - &2 - &3 - &4 was adjusted and move time determined |
| 155 | No description maintained for &1 |
| 156 | Country/Region of departure &1 not maintained in move time table |
| 157 | Region of departure &1 not maintained in move time table |
| 158 | Mode of transport &1 not maintained in move time table |
| 159 | Date &1 not maintained |
| 160 | Leg &1 - &2 - &3 has move time zero |
| 161 | Preceding date &1 already used with operative date (leg with &2) |
| 162 | Country/Region of arrival &1 not maintained in move time table |
| 163 | Region of arrival &1 not maintained in move time table |
| 164 | Only one transportation chain of type &1 can be assigned |
| 165 | Transportation chain &1 is not assigned to a supplier |
| 166 | Use WCHAIN1 for creation, WCHAIN2 for change, or WCHAIN3 for display |
| 167 | Staging date not taken into account if transportation chain assigned |
| 168 | Maintain staging time for transportation chain with staging date |
| 169 | Provision time is maintained, but there is no transportation chain |
| 170 | &1 cannot be used as a date |
| 171 | Enter a dispatch method |
| 172 | Cannot find any items for the purchase order &1 |
| 173 | Cannot find any schedule lines for the purchase order &1 |
| 174 | You cannot use transportation chain ID &1; choose another name |
| 175 | Only mode of transport "Regular" and "Express" possible for internal TC |
| 176 | Time slot &1 is already contained in the time slot list |
| 200 | Error with &1 in table &2 |
| 301 | PO &1 item &2 schedule line &3 does not exist |
| 302 | Unsupported transaction type &1 for automatic mode |
| 303 | Undefined processing mode &1 |
| 304 | Dateline &1 does not exist |
| 305 | Call &1: &2 missing |
| 306 | Availability date not defined |
| 307 | Errors issued in Delivery Date determination using Transportation Chain |
| 400 | Error in date calculation |
| 401 | No date transferred for date calculation |
| 402 | Error in scheduling |
| 403 | Error in parameter determination |
| 404 | No transportation chain is assigned to DC &1 in the supplier master |
| 405 | Error calling function module &1 |
| 406 | Date change: &1 &2 was changed to &3 |
| 407 | No entry exists in the date table |
| 408 | Date &1 was changed from &3 to &4 in acc. with delivery cycle &2 |
| 409 | Date &1 was changed from &3 to &4 in acc. with order cycle &2 |
| 410 | Date &1 changed from &2 to &3 |
| 411 | &1 &2 precedes &3 &4 - check the start dates |
| 412 | &1 &2 is higher than &3 &4 - check start dates |
| 413 | &1 &2 is before &3 &4, tolerance date of preceding date is adopted |
| 414 | &1 &2 precedes &3 &4, tolerance date of predecessor was adjusted |
| 415 | No start date could be determined |
| 416 | Order and delivery cycle could not be determined |
| 417 | Customizing for scheduling could not be determined |
| 418 | Enter a supplier |
| 419 | Enter an article |
| 420 | Ship-to party was not transferred to scheduling |
| 421 | Incoterm was not transferred to scheduling |
| 422 | No start date was transferred to scheduling |
| 423 | Site &1 is not a distribution center |
| 424 | Site &1 is not a store |
| 425 | Site &1 does not exist |
| 426 | The dates in the dateline cannot be sorted |
| 427 | No transportation chain entered for supplier &1 |
| 428 | Start date &1 is invalid |
| 430 | A dateline without ID is not allowed |
| 431 | Transfer date cannot be determined - check incoterm &1 |
| 432 | Incorrect assignment of transfer date to incoterm &1 |
| 433 | Order cycle &1 is invalid; order date will be calculated without cycle |
| 434 | Delivery cycle &1 invalid; delivery date will be calculated without cycle |
| 435 | Ship-to party missing; GR processing time cannot be determined |
| 436 | Dateline will be created with default planned delivery time of 99 days |
| 437 | Simplified date calculation carried out with planned delivery time |
| 438 | Error in scheduling, date line cannot be calculated |
| 439 | Automatic date shift will be executed with an interval of zero days |
| 440 | The interval between 2 dates is greater than 999 days |
| 441 | You can no longer change the transportation chain at this point |
| 442 | The time sequence of the start dates is incorrect |
| 443 | Date lead time or date follow-up time for date &1 will be modified |
| 444 | The total interval is greater than 999 days |
| 445 | &1 was changed from &3 to &4 in accordance with delivery cycle &2 |
| 446 | &1 was changed from &3 to &4 in accordance with order cycle &2 |
| 447 | It is no longer possible to change the transportation chain |
| 448 | System could not determine The calculation type |
| 449 | It is no longer possible to change supplier/switch transportation chain |
| 450 | It is no longer possible to switch the internal transportation chain |
| 451 | Error while transferring actual dates from the old dateline |
| 452 | Actual start date posted is not last date on dateline |
| 453 | Incorrect scheduling call; see the long text |
| 454 | Transfer date for Incoterm &1 found w. normal, but not dispatch method &2 |
| 455 | Combination of distribution center and dispatch method is not permitted |
| 456 | Combination of store and dispatch method is not permitted |
| 457 | Date &1 has already been posted and may not be changed |
| 458 | Incorrect scheduling call, start date was not transferred correctly |
| 459 | Int.trnsp.chain not maintained in supplying plnt asgt for &1 nor in DC &2 |
| 460 | Change of internal transport chain not possible |
| 461 | Automatic date shift for the order date is not permitted |
| 462 | You cannot select the order date as the start date |
| 463 | Switch to internal transportation chain &1 is not possible |
| 464 | Switch to internal transportation chain &1 is not possible |
| 465 | Assignment of ship-to party and transportation chain not permitted |
| 466 | Combination of ship-to party and dispatch method is not permitted |
| 467 | Automatic date shift to the past is not permitted |
| 468 | Scheduling is deactivated |
| 469 | No transportation chain is assigned to supplier &1 |
| 470 | Transportation chain &1 (&2) for dispatch method &3 is not an ext. TC |
| 471 | Transportation chain &1 (&2) for dispatch method &3 is not an int. TC |
| 472 | No transportation chains are assigned to info record and supplier &1 |
| 473 | Date &1 occurs more than once in dateline; this is not permitted |
| 474 | Informative date without predecessor &1 was transferred without a date |
| 475 | Informative date without predecessor &1; interval is set to 0 |
| 476 | Date &1 of the informative date &2 is before the order date &3 |
| 477 | Date &1 of the informative date &2 is after the delivery date &3 |
| 478 | Internal transportation chain cannot be copied into the dateline |
| 479 | No transportation chain is assigned to the info record |
| 480 | Staging time is zero |
| 481 | All dates already posted; no start date could be determined |
| 482 | No date postponement possible since all dates already posted |
| 483 | The most recently posted date is not in the new transportation chain |
| 484 | Assign a transportation chain in the supplier master data |
| 485 | Deleting external transportation chain is not permitted |
| 486 | Deleting internal transportation chain is not permitted |
| 487 | No transportation chain is assigned to the info record: see long text |
| 500 | Date line cannot be checked |
| 501 | Dateline is not consistent |
| 502 | Date line &1 date_id &2: incorrect date type |
| 503 | Date line &: different IDs |
| 504 | Date line &1 date ID &2: &3 missing |
| 505 | Date line &1, date &2; plan date is after tolerance date |
| 506 | Date line &1 date ID &2 incorrect format: &3 |
| 507 | Date line &1: &2 cannot have a preceding date |
| 508 | Date line &1: &2 must be a operative date |
| 509 | Date line &1: &2 must have a preceding date |
| 510 | Dateline &1: &2 is inactive |
| 511 | Dateline &1, date &2: Predecessor date is not an operational date |
| 512 | Date line &1 date ID &2; plan date is before predecessor plan date |
| 513 | Date line &1 date ID &2; tolerance date is before predecessor tol. date |
| 514 | Date line &1: &2 is predecessor of more than one operative date |
| 515 | Date line &1: preceding date &2 does not exist in date line |
| 516 | Header structure of date line missing |
| 517 | Date line ID missing |
| 518 | Date ID missing |
| 519 | Actual posting: &1 &2 &3 &4 &5 |
| 520 | Dateline is empty |
| 521 | Incoterm1 &1 cannot be determined |
| 522 | Incoterm2 &1 was determined in scheduling |
| 523 | Transfer location &1 of dateline differs from Incoterm2 &2 |
| 524 | Only general leg with ctry/reg. &1 since no transfer region is defined |
| 525 | Incoterm1 was deleted; transfer location will also be deleted |
| 526 | Cannot determine transfer date &1 in dateline |
| 527 | Supplier &1 is monitored, but not transfer date &2 |
| 528 | Transfer date is empty |
| 529 | Date '&1': calculated date is in the past (&2) |
| 530 | Operational date &1 may not be removed from dateline |
| 531 | Actual-posted dateline &1 may not be removed from dateline |